Steelmaster 1200WF The Ultimate Intumescent Paint for Steel Fire Protection independently Certified by Exova Warrington Fire Research. It is a single pack high solids waterborne thin film intumescent suitable for structural steel, beams, columns, lightweight and hollow sections exposed to cellulosic fire. Ideal for the protection of steel buildings for 60 mins, 90 mins, 120 mins and 3 hours fire protection. Designed for high performance and minimum environmental impact. Steelmaster 120WF contributes to Green Building Standard credits approved by LEED and BREEAM. EPD Verified. A low odour environmentally compliant coating Steelmaster 1200WF meets the requirements of BS476 part 20/21 Certifire CF5243, CE marked by European Technical Assessment ETA-20/1295, ASTM E84 Class A and EN 13381-8. Tested to EN 13501-1 it has a Reaction to Fire Class B-s1, d0 . Suitable as a finish coat internally or externally up to corrosivity category C3 (ISO 12944-2).
£271.80£226.50 Inc. VATExc. VAT
• High Solids Intumescent Fire Paint
• Steel Fire Protection upto 3 Hrs.
• Fire Rated B-s1, d0. EN 13501-1
• Ideal for Lightweight Steel and Hollow Sections.
• Exova Independently Tested.
• Waterbased, Low Odour Low VOCs
• LEED and BREEAM Certified.
• High Build upto 690 microns per coat.
• Free Estimates, Loading and Specification Reports.
• Guaranteed by Warrington Fire Research.
• CE Marked. EPD Verified.
• ASTM E84 Class A. • EN 13381-8.
• BS476 part 20/21: Certifire CF 5243
• Fire Rated B-s1, d0
• High Volume Solids 69%
• Ultra Low VOCs 30g/lt.
• Clean up with water.
Surface preparation and coating should commence only after all welding, removal of sharp edges and treatment of welds is complete. Pilot QD is an approved fire tested primer. Ensure the primed surface is free from oil grease and other contaminants prior to application of Steelmaster 1200WF. Apply to the recommended DFTs detailed in the free loading report for your steel structures. Read the technical datasheet for more detailed information.
